OUR SYSTEM USES STATE OF THE ART EMS LIGHTING TECHNOLOGY

Developed at MIT to promote quicker, better root development to get the most potential out plants.

This lighting technology utilizes a unique blend of invisible and deep penetrating short and long infrared wavelengths that excite molecular activity providing an efficient way to affect grow performance and maximize photosynthesis without heat. EMS energy promotes more rapid healthy growth, thicker stems and higher yields since the essential minerals, nutrients and water are more evenly distributed via petioles and stomates throughout the entire plant.

When utilizing EMS technology, micromole (umol) measurement (photons of light passing through a given area) and Photo-synthetically Active Radiation (PAR) analysis alone are not enough. It is the coupling of these different energy sources that creates a more efficient means of increasing plant growth performance.
EMS lighting technology is the best, most energy-efficient and eco-friendly grow system available.

TECHNICAL SPECIFICATIONS

  • 12” x 12” x 1 1/2” (30.5cm x 30.5cm x 3.8cm) 60 watts panel.
  • 60 Diode Array: Full Spectrum White (Daylight source), Red, and EMS (Electromagnetic Spectrum) blended Invisible spectrum.
  • 40kHz-will not interfere with electronic equipment.
  • Removable front acrylic high transmittance shield.
  • Generally better for C3 Plants.

FEATURES

  • 24-hour cycles and no spectrum management requirements provide a universal lighting protocol for all plants and facilitate combining different plants into the same structure.
  • No rest period required for plants means a faster-growing cycle and more harvests per year.
  • Low Power requirements per light (60 watts – 1/6th the power of typical full spectrum grow lights) cut down on energy costs significantly saving thousands of dollars in electrical costs over the typical HID, HPS or LED spectrum light configurations.
  • A lightweight and durable enclosure that survives daily use and abuse.
  • Heat, Cold, Humidity, water-resistant, and impact-resistant design.
  • No parts to wear out or replace.

ADVANTAGES

  • Provides a more efficient and natural approach to grow light that instead of stressing the plant tissue, nourishes and stimulates stem growth, and develops dense and healthy leaves.
  • Increases plant water retention on a cellular level, increasing irrigation efficiency and reducing the needs required for the life of the plant along with the nutrient and fertilizer load.
  • The EMS wavelength energy emitted penetrates through the entire plant, through the soil, right into the root system, interacting with the plant’s physiology in ways other lights cannot.
  • Originally developed for human health applications, EMS lighting provides a 100% safe and pleasant environment for employees to work under without limitations on time and exposure or the need for eye and skin protection.
  • Creates quicker CO2 uptake within the plant, creating healthier, faster-producing plants more resistant to pests and mold attack and resulting in better and faster yields.
  • EMS energy eliminates the dehydration factor and high differentials throughout the plant while promoting quicker and stronger root development.
  • The positive effects of EMS lighting deliver a boost in photosynthesis, respiration, mineral nutrition, and overall product quality.
  • No radiant heat is produced nor transmitted allowing lights to be placed directly above the plants, closer to the canopy to augment light density and enhance photosynthetic activity without increasing the transpiration levels, causing heat stress or bleaching on the plants.

“NOTHING CAN DIM THE LIGHT THAT SHINES FROM WITHIN”

Maya Angelou

EMS GROW LIGHTS

LED STORM Grow Lights

Developed at MIT, we are using the best and most energy efficient Electromagnetic Spectrum (EMS) LED grow lighting available today. LEDStorm lights increase plant water retention on a cellular level, reducing the amount of water required for the life of the plant. LEDStorm lighting also creates quicker CO2 uptake within the plant, creating healthier, faster  producing plants more resistant to pests and mold attack. Increasing CO2 uptake on average produces 25% faster plant growth and fruit production.

The LEDStorm lighting system we use is a more efficient and natural approach to grow lighting; different from typical High Intensity Discharge (HID) lamps used in greenhouses today, and different from typical Light Emitting Diode (LED) grow lighting systems. In an EMS system we utilize a unique blend of invisible spectra on the Infrared range. This blend of higher nano-meter range frequencies actually interacts with the visible spectra present in the fixture, and alters the characteristic of their wavelengths.

The EMS wavelength energy emitted penetrates through the entire plant, right through to the roots. When utilizing EMS technology, micromole (umol) measurement (photons of light passing through a given area) and Photo-synthetically Active Radiation (PAR) analysis are not enough alone. It is actually the coupling of these different energy sources that are relevant to create a more efficient means of affecting the growth performance of the plant.

The Most Eco-Friendly Grow Lights Available

  • Lightweight Electromagnetic Spectrum Lighting.
  • Durable – Impact resistant design survives shipping & daily use and abuse. Heat, Cold, Humidity & Water resistant.
  • Low Power – 60 watts per light (1/6th the power needed compared to typical full spectrum grow lights).
  • Little to no heat from the lights. (heat = wasted energy and shorter operating life).
  • Long Life – No parts to wear out or replace.
  • Safe for humans and plant use 24 hours a day. No rest period required when exposed to plants means a faster growing cycle and more harvests per year.

EMS LIGHT THEORY

(Scott L Gordon, 2010)

Electromagnetic Spectrum (EMS) energy is created by wavelengths generated by the invisible light spectrum. Visible light also has electromagnetic properties, however its shorter wavelengths are weaker and less penetrative.

The stronger energy of these invisible spectrum’s, interacting with the visible spectrum, alters the characteristics of the waves of their visible counterparts, and when coupled with the different colors of the visible spectrum, creates a delivery system that increases the penetrative values of the lesser wavelengths.

Electromagnetic Spectrum (EMS) energy reacts with the physiology of humans, animals, and plants. These deep penetrating wavelengths, generated by the invisible spectrum, that in nature are relevant during the day and night, actually excite molecular activity.

SPECIFICATIONS

  • 12” x 12” x 1 1/2” Panel
  • Removable front acrylic high transmittance shield.
  • Conformal Coated PCB is resistant to water and high humidity.
  • Performs well in hot and cold conditions
  • Produces no significant heat, allowing for closer proximity to plants with less de-hydration, resulting in more efficient water usage.
  • Generally better for C3 Plants.
  • Suitable for all growth phases
  • Covers up to a 5’x5’ (25 square foot) area
  • 60 watts
  • Plug in Power supply
  • Line-in Voltage: 90-309vac (higher voltages available upon request, additional cost applies)
  • Line-out Voltage: 24/48vdc (12vdc upon request)
  • 6 ft 12/0 power cord, with 3 prong Hubbell style plug. (Twist-lock and other styles available upon request, additional cost applies)
  • 40kHz-will not interfere with other electronic equipment
  • 60 Diode Array: Full Spectrum White (Daylight source), Red, and EMS (Electromagnetic Spectrum) blended Invisible spectrum. The LEDStorm Grow Spectrum emits an unique wavelength energy field that penetrates through the entire plant, through the soil, right into the root system, interacting with the plant’s physiology in ways other lights cannot.
  • The visible spectrum also produces a natural looking source that will not distort the appearance of your plants and creates a more pleasant working environment.
  • Fixture comes with Yoke, Bail Block, Pipe Clamp, and Carabiner-makes it easy to rig a variety of ways in any location.
  • Fixture Weight (with rigging): 3 Lbs 2 ounces
  • Fixture With attached power supply (with rigging): 4 Lbs 2 ounces
  • Reduced Water needs for the same growth
  • Reduced nutrient/fertilizer load for healthy plants